Inside The Real Repair Shop 1

They do make them like they used to. You just have to know where to look.

Think back 30 years, and if you can’t, ask anyone over the age of 42. In the place you grew up, how old was the kettle? It might seem a strange question, but as a (slightly odd) child, I noticed stuff like that. I can fondly remember my parents’ own Russell Hobbs K2 kettle, which had been given to them as a wedding gift and was still going strong after they divorced, 25 years later. Unlike their marriage, the kettle was well engineered, robust and easy to mend.

Russell Hobbs advert for the seminal K2 kettle, familiar to many. Image taken from Google Images, FixItWorkshop is not the copyright owner.

Not long ago, long service was expected from appliances and my friends and relatives had similar experiences. Trust me, I’ve asked them. Buying spare parts was also a thing. You could easily repair kettles of that vintage with basic tools and without the need of a yet-to-be-invented online video. Hardware shops would stock cost-effective spare parts like elements and rubber seals to keep your kettle running for longer, but over time, this type of thing has become the reserve of nerds like myself.

During the last 40 years, the market for small appliances such as vacuum cleaners, toasters, kettles and much more has become congested with laughably cheap goods, and while the prices can make items accessible, it’s usually a case of ‘buy cheap, buy twice’. 

Manufacturers have perfected built-in obsolescence to such a degree that they can time your product to fail, just after the warranty expires. Bad for many reasons, but the main thing is that a £15 toaster thrown out after two years will probably end up as landfill. There are free, environmentally kinder disposal routes available from your local council in the UK, but many people just don’t bother.  Sad, but true.

It’s still possible to buy something well-designed and robust that will be supported by a responsible manufacturer, you just need to know what to look for.

Do you really need it?

Just because your friend has a kettle with an interactive disco display controlled by their iPhone, do you need one?  Probably not.  No one does. Google ‘the best kettle’ and you’ll find products that have more knobs and whistles than a power station.  This makes them more complicated and likely to go wrong in the future and contain more precious metals, increasing their environmental impact.  Remember what you need the product to do. Keep it simple.

How long will it last, will it be any good?

This is a tricky one to quantify as lots of things affect that.  But ask yourself, is a kettle costing a tenner going to be a family heirloom to hand-down?  Probably not.  It will boil water, it will make a lot of noise, it will be inefficient.  Take  customer reviews on Amazon with a pinch of salt. Trust organisations such as ‘Which’ to guide you on matters of performance and longevity before handing over your hard-earned wedge.

Can I get help when I need it?

Many retailers and manufacturers are not set up to take care of your product once it’s in your hands.  At the end of your twelve-month warranty, is there a local agent or are there spares available to fix your product, when you need it?  Before making a purchase, do some online research on your chosen toaster manufacturer.  Do they have a help desk, can they supply reasonably priced parts, are there engineers out there who can help repair your item? Responsible manufacturers are out there…

Russell Hobbs K65, Henry HVR160 vacuum cleaner, Kenwood Kmix KMX750 Dualit classic toaster. What do they all have in common? All have reasonable support from the manufacturer, after purchase.

Give yourself time to work this stuff out, and you’ll end up replacing your appliance less often.  Better still, you’ll be able to fix it when it goes wrong, saving it from becoming waste. You’ll also be able to pass it on when the time comes, which is a far better thing to do.  If buying new isn’t an option, don’t be afraid to buy quality appliances second-hand from places like eBay, Facebook and Gumtree.  It might not come in a new box with a receipt, but it’ll still be decent, without costing the earth.

Matt or Fixitworkshop is not affiliated with any of the products shown in this article.  The items displayed are for illustration only, but were chosen with care based on Matt’s own repair knowledge and experiences.

Repair, kettles and er, the Citroen 2CV

Less is usually more. Simpler devices can mean repair is more likely in the event of failure.

I keep a model of a Citroen 2CV car on my desk at work.  It’s about 30-odd years old and it’s a bit battered due to an incident involving a shelf, my old cat and an 8ft drop, but that’s another story.

IMG_20200704_122535
FixItWorkshop, Worthing, July’20, The 2CV (AZ series)

The 2CV is there to remind me to keep things simple, to the point.

To me (and many others) the 2CV represents pure function over form.  Nothing on the car is superfluous to its function as a capable load lugging, robust, ever-repairable and frugal vehicle. I have a soft spot for these cars. They encapsulate the phrase ‘less is more’.

Not every story from the workshop is rosy and my heart usually sinks when I receive something to fix that has tiny printed circuit boards fitted inside that do ‘something’ and nothing at the same time.

What the Tin Snail do I mean by that? Many appliances and machines manufactured in the last 20 years or so often contain ‘mini’ circuits that control ‘something’.

Take an electric kettle, something that most people have in their homes. Kettles generally are a water holding vessel, a heating system, and an on/off switch with a boiling water state detecting negative feedback loop (it switches off by itself when the water boils).  There’s also some wire and stuff.

Electric kettles haven’t really changed that much over the years, after all the basic need hasn’t changed:  You put water in, you switch it on, you get hot water to make a drink. Nothing has changed. However, many offered these days are fitted with things like filters, LED lighting and other electronic temperature control systems with bells on.

Trouble is, all these (kettle) gadgets tend to be controlled by a small circuit board which isn’t repairable or even replaceable. It only takes an accidental water spill, some static electricity or bump mishap and that tiny circuitry is toast.  Not even a professional circuit repair agent, let along home spanner wielder would have a chance of repairing the broken circuit. When failure occurs, many will just discard the appliance and go and buy another one, quickly. Who wants to be without tea or coffee?!

The tragedy is that the rest of the (kettle in this case) appliance is, nine times out of ten, OK and if it was made with more traditional components that one could see with the naked eye, the appliance would stand far more chance of being repaired easily and economically. Something to think about, next time you’re considering a new purchase.

 

 

 

Chilly Hotpoint Tumble Dryer (VTD00)

A cheap fix for an old tumble dryer.

A tumble dryer that didn’t dry

img_3201
FixItWorkshop, Worthing,  Feb’17.  Hotpoint (VTD00) tumble dryer (Ariston, Creda, Indesit similar.  Now drying once more…

This machine is our very own, which decided to stop drying clothes.  Everything seemed to work; the drum was going around, the timer was working and nothing sounded out of sorts, but it started taking longer and longer to dry clothes.  In short, it wasn’t well.

This particular model is well documented online as it’s the same one with a world-wide model recall.  Fortunately, Hotpoint/ Indesit/ Creda/ Ariston have an excellent recall process and information service.  In fact if you’re concerned about yours, please visit http://www.hotpointservice.co.uk/safety-notices/ to see if your machine is listed.  This machine had been modified and was cleared safe for use.

Anyway, it was time to dig out the tools.  There’s not much to a tumble dryer really, the most expensive and important part being the motor, which in this case was fine.  Having tested the heating elements for suitable resistance, it was time to check the wiring, which also tested fine.

Since the machine would heat up and then cool, it suggested a temperature control system fault.  This machine has three temperature sensors; one in the exhaust and two on the back of the heater, the latter two to act as heat control and safety cut out.

If you’re still reading,  it turned out that the exhaust thermostat sensor was at fault.  Once it has allowed a brief heat cycle, it would shut down for ages.  It had excess temperature switch ‘hysteresis’.  The spare part was about £12, so versus the cost of a replacement machine at about £170, it was well worth spending time on the machine.