Repair, kettles and er, the Citroen 2CV

Less is usually more. Simpler devices can mean repair is more likely in the event of failure.

I keep a model of a Citroen 2CV car on my desk at work.  It’s about 30-odd years old and it’s a bit battered due to an incident involving a shelf, my old cat and an 8ft drop, but that’s another story.

FixItWorkshop, Worthing, July’20, The 2CV (AZ series)

The 2CV is there to remind me to keep things simple, to the point.

To me (and many others) the 2CV represents pure function over form.  Nothing on the car is superfluous to its function as a capable load lugging, robust, ever-repairable and frugal vehicle. I have a soft spot for these cars. They encapsulate the phrase ‘less is more’.

Not every story from the workshop is rosy and my heart usually sinks when I receive something to fix that has tiny printed circuit boards fitted inside that do ‘something’ and nothing at the same time.

What the Tin Snail do I mean by that? Many appliances and machines manufactured in the last 20 years or so often contain ‘mini’ circuits that control ‘something’.

Take an electric kettle, something that most people have in their homes. Kettles generally are a water holding vessel, a heating system, and an on/off switch with a boiling water state detecting negative feedback loop (it switches off by itself when the water boils).  There’s also some wire and stuff.

Electric kettles haven’t really changed that much over the years, after all the basic need hasn’t changed:  You put water in, you switch it on, you get hot water to make a drink. Nothing has changed. However, many offered these days are fitted with things like filters, LED lighting and other electronic temperature control systems with bells on.

Trouble is, all these (kettle) gadgets tend to be controlled by a small circuit board which isn’t repairable or even replaceable. It only takes an accidental water spill, some static electricity or bump mishap and that tiny circuitry is toast.  Not even a professional circuit repair agent, let along home spanner wielder would have a chance of repairing the broken circuit. When failure occurs, many will just discard the appliance and go and buy another one, quickly. Who wants to be without tea or coffee?!

The tragedy is that the rest of the (kettle in this case) appliance is, nine times out of ten, OK and if it was made with more traditional components that one could see with the naked eye, the appliance would stand far more chance of being repaired easily and economically. Something to think about, next time you’re considering a new purchase.




Leaking Reginox Miami Tap

Reginox tap gets a new mechanism.

A friend of mine had long been complaining about a leaking tap in his kitchen for some time, so it was a long overdue job for me to tackle.

A quick look online revealed lots of videos and help, but nothing covering the actual problem in this instance.

The tap spout was leaking from the swivel joint where the spout body is allowed to move approximately 180 degrees to move from sink to sink, in this case.  This is a fairly common problem for taps (faucet if you’re in America) of this design and sooner or later they all seem to suffer.

I was interested to know if the parts were available, but Internet searches revealed nothing.  An email to Reginox UK was answered very quickly and I was referred to Mayfair Brassware Ltd, the manufacturers of the tap in this instance.  The parts were quickly identified and delivered next day. Both companies were very helpful and efficient, useful for a non-plumber, like myself.

The cost of replacing the tap was about £50, so the £5 spent on replacement seals was well worth it.  The whole job was done in 10 minutes using basic tools.