Kenwood Chef Repair

Kenwood repair in Worthing, West Sussex

Smelly Kenwood Chef A901

img_2959-resized-smaller
FixItWorkshop, Worthing, Jan’17.  Repaired Kenwood Chef A901

This Kenwood Chef developed a nasty little problem. The failure smelled expensive and the Chef even puffed out some smoke when it began to fail, it would operate, but noisily and badly, so it to the workshop it had to go.

It was in decent overall condition and has loads of accessories, so definitely worth saving since a new one is over £300 new.

Since the speed control circuitry is a common failure on models of this age, it seemed sensible to start there.  On this unit, access wasn’t a problem and the issue was quickly diagnosed.  Both capacitors had failed (spectacularly)  and one of the resistors had become weak by about 20 Ohms or so.  Repair kits are readily available online for those who are willing to save these excellent machines, so after removing the faulty components, new items were fitted.

Another little annoying problem with the Chef, was the main drive belt.  It was intermittently rubbing the main plastic body of the unit, making a horrible sound and melting some of the casing (only cosmetic).  The motor mounting spacer had compressed on one side causing the belt to not run correctly.  This was fixed with a small washer to correct the belt’s alignment.

With a little bit of grease, WD40, Brasso, contact cleaner, repair kit and washer, the whole job took a couple of hours (including fettling time) and cost me under £8.  Definitely worth the effort considering the price of a replacement Chef.

Here’s a picture of the new components fitted in situ…

img_2958-circles
FixItWorkshop, Worthing, Jan’17.  New capacitors, resistors and triac fitted, fixed!

fixitworkshop.co.uk repair service and blog

The diary of a tinkerer: Stories, advice, tips and sometimes the odd failure to inspire your own repair.

Repair shop | Repair blog | Repair information source | Making everyday things last longer

The tinkerer at FixItWorkshop.co.uk is Matt Marchant

IMG_2636
FixItWorkshop, Worthing, July 2020, Matt with a load of food mixers

You can follow me on Twitter (if you want)

I also write for Bangernomics (a car website)

  • I write about things I fix and even those I can’t
  • I offer a repair service for a small fee
  • I occasionally volunteer at Repair Café and similar events in Sussex and surrounding area

I love repairing things and hate throwing things away that can be saved. There’s far too much waste in the world.  Many things that can sometimes appear unrepairable, are indeed repairable, with a little tinkering.

I want to encourage people who doubt their own ability to repair their things, to give repair a go.  Afterall, if ‘that thing’ isn’t working, grab a screwdriver, take it apart and investigate.  What have you got to lose?

I’ve been tinkering with bikes, cars, coffee machines, toys and vacuum cleaners and pretty much anything that can be dismantled since I could hold a screwdriver.  I’ve worked for BT as a senior engineer and I’ve studied design, business and electronics.

Enjoy the repair diary of a tinkerer.  I hope it gives you a nudge to repair your broken thing.  If you can’t, I might be able to help.

Scroll through the repairs