Money, that’s what I want

A cool 1980s toy robot money box gets repaired.

Who doesn’t like a toy robot? I mean, everyone loves a toy robot, especially one with pop up eyes and one that eats coins.  No?  Well, you’re wrong if you don’t agree!

Money 2
FixItWorkshop, March’19, Tomy Mr. Money.

This is my own Tomy Mr. Money, which I’ve had since about 1988 ish, so it’s getting on a bit.  Like me.

Back then, I wasn’t that diligent about leaving batteries in situ for long periods and when I dusted off this piece of retro cool for my daughter to play with, we discovered that the passing of time had not been kind to the old battery or insides.  Which was a bit of a shame.

However, I wanted to show everyone that old toys are way cooler than new ones, so out with the screwdrivers, cleaning stuff and hammer (well, not the hammer) to see what could be done.

Luckily for me and Mr. Money, the battery compartment hadn’t fared too badly with just light corrosion to the battery terminals, which soon cleaned off with brake cleaner and some light filing to near good as new standard.

With a new AA battery installed, Mr. Money didn’t really respond that well to having money placed on his hand.  In years gone by, a coin placed on his hand would trigger his eyes to open, the hand to raise to his mouth, the coin to be eaten and lips to be licked, as well as doing a little side to side dance.  Mr.Money was now looking a bit arthritic.  Could it be that new money is a lot lighter than the 1980s money he was designed for or was it just that the battery corrosion had run deeper than first appeared.  I suspected the latter.

I took Mr. Money apart and found that the microswitch that triggers the mechanism was corroded and needed cleaning and that some of the moving parts also needed a quick brush up, all of which had Mr.Money back to rude health.

IMG_5190
FixItWorkshop, March’19, Tomy Mr.Money, in pieces.

While doing the repair, I decided that it wasn’t obvious how the toy came apart and that some owners might decide to scrap theirs due to similar problems.  So, I decided to make a little slide show of the dismantling, to help others.  Enjoy.

Cost of replacement:  £ priceless/ eBay if you’re lucky.  Cost of repair:  One IPA beer.

 

Musical keys

A child’s set of keys gets repaired in the workshop

It makes a nice change to repair something like a childs’ toy.  I know that if the repair works out, it’ll usually make someone very happy.  However, having just said that, the repair I’m about to discuss, didn’t bring joy for all…

First off, I’ll get a moan out-of-the-way.  Too many kids toys take too many batteries – it’s been like that since I was a kid.  This does two things; makes the toy expensive to own and damaging for the environment when the batteries expire.  Now, I know there are some very cool kids toys that rely on sophisticated electronics to make them work, but manufacturers:  Please try to think harder about the toy’s overall impact on the environment and it’s in-life running costs.

OK, rant over.

On with the repair.  This kids-chew-musical-keys is supposed to mimic an adults’ set of car keys.  It doubles up as a teething chewy thing as well as an imitation car alarm blipper remote fob thing, that plays a tune.  Delightful.

IMG_8377.JPG
FixItWorkshop, March’19, kids car keys.

This set of keys had stopped playing a tune, when any button was pressed.  To some, that might have been a good thing.

The battery compartment contained two LR44 coin batteries.  These are found in many items and are readily available, if you know where to look, but are not commonly stocked in supermarkets, where I suspect most people buy batteries.

Taking the batteries out revealed some light corrosion on one cell, but no dramas.  The other one was corrosion free.  However, a quick test with the multimeter revealed that both batteries were kaput.

I usually keep a pack of LR44s (as one does) in case of toy key emergencies like this and luckily on this occasion, I had two shiny new ones to fit.  But, upon installing them, replacing the cover and pressing one of the buttons for the first time there was still no sound.  How odd.  What I thought would be a quick battery change had escalated in to a full toolkit situation.

Whipping the back of the key fob apart revealed a simple integrated circuit with the battery terminals, all in good condition.  The small piezo speaker was held behind the main circuit board and on closer inspection, I saw that one of the soldered connections had broken away from the speaker.

Solder repair jobs like this are difficult as excess heat can quickly transfer from the joint being operated on, to the whole component, causing damage if too much heat is conducted.  I had to be careful.

This slideshow requires JavaScript.

After some careful soldering, the broken wire was reconnected, circuit board re-installed, casing screwed back together and batteries re-fitted.  A quick tap of one of the buttons then revealed musical joy.  After a couple of presses I then began to regret the repair…

Cost of replacement:  Not sure, £5 ish?  Cost of repair: A bit of soldering.