A little water leak repair on a Boxster.
Not strictly a FixItWorkshop blog article really, but hey! It’s a cheap fix.
My beloved 2003 Boxster developed puddles in the umbrella holder on the passenger side (RHD car) when it rained hard.
The window was adjusted correctly and the door aligned properly, but when it rained, water ran down near the door mirror, under the seal, down the door card and in to the umbrella holder area. Water leaks like this, especially on the passenger side (RHD car) are a real problem on the Boxster, since the cars’ ECU is mounted on the floor on that side and is big £££ to replace/ repair if it fails.
Seemingly, the door seal rubber on the car adjacent to the door mirror area had worn and become slightly porous and was allowing water to get in between the glass and seal.
New door seals are very expensive and to prove the issue, I applied a small trace of tap (faucet) silicone grease to the area to restore the wax-like finish, the seal should have to seal properly.
This has fixed the problem for now. The door seal is worn and will need replacing in the long-term, but for now, this is a very cheap fix.
Reginox tap gets a new mechanism.
A friend of mine had long been complaining about a leaking tap in his kitchen for some time, so it was a long overdue job for me to tackle.
A quick look online revealed lots of videos and help, but nothing covering the actual problem in this instance.
The tap spout was leaking from the swivel joint where the spout body is allowed to move approximately 180 degrees to move from sink to sink, in this case. This is a fairly common problem for taps (faucet if you’re in America) of this design and sooner or later they all seem to suffer.
I was interested to know if the parts were available, but Internet searches revealed nothing. An email to Reginox UK was answered very quickly and I was referred to Mayfair Brassware Ltd, the manufacturers of the tap in this instance. The parts were quickly identified and delivered next day. Both companies were very helpful and efficient, useful for a non-plumber, like myself.
The cost of replacing the tap was about £50, so the £5 spent on replacement seals was well worth it. The whole job was done in 10 minutes using basic tools.
An annoying leak, sorted.
A slight departure from my usual ramblings about white goods and other domestic appliances in this entry. Outside of The Workshop, I’m a keen petrol head who loves to tinker with cars and motorbikes and my own car was suffering from a recent bout of coolant incontinence.
Like me, most owners of these cars dread anything like this happening as it usually means big money.
The leak only happened when the car cooled after it was was run up to temperature and was evident in the area under the oil filter housing. Luckily, the leak wasn’t serious and was repairable with a 10mm spanner, washing-up bowl and 4000 grit sandpaper.
Here’s a little video which I hope will help other Boxtser owners.