Make it so, number one

A Star Trek Next Generation themed money box gets a light restoration

IMG_20200617_221628
FixItWorkshop, Worthing, August’20, Star Trek money box.

Some things are just cool.  I mean look, if this money box doesn’t encourage prudent saving behaviour, then quite frankly, nothing will.

Spoiler alert:  Put money in, some of the Star Trek crew (Next Generation) light up, followed by speech and cool sound effects.  What’s not to like.  Pressing the Star Trek (Starfleet) button, simulates the effects too. What fun.

This money box had once been cherished by its owner, but had been left in the attic for a number of years, with the original batteries still fitted.  As anyone who’s done this before will know, old batteries leak in time.  If you’re lucky and catch the ensuing corrosion in time, you might get away with just battery removal and a light clean up. If you leave it long enough, like the owner of this toy had, you’ll end up with a lot of rusty mess and no chance of life (Jim, but not as we know it). Remember, take batteries out before putting your toys away, long term.

Make and model: Star Trek money box (make unknown)

Fault reported: Not working/ battery compartment heavily corroded

Cost of replacement: £ Irreplaceable

Manufacturer support:  0/10

Cost of parts: £4.00

Hours spent on repair: 1.5 hours

Tools needed: Screwdrivers, test meter, heat shrink, soldering iron etc

Sundry items: Cleaning materials, paint, contact cleaner

Repair difficulty: 3/10

Cups of tea: 1

Biscuits: none (1 jammy donut, slightly warmed, as they should be)

 

This slideshow requires JavaScript.

When I get an item like this, I tend to spend a bit of time researching it online, to see who knows anything about it.  It turns out, that this money box isn’t that well represented and after a few Google searches, I simply gave up and got on with the repair.

Parts for something like this are not available from the manufacturer, even if they are still around.  Presented with a situation like this, the only thing that can be done is to see if other parts can be bought off the shelf from component suppliers and be made to fit.  One simply has to be creative.

Good old eBay came up with the goods.  AA and C type battery terminals were available in single and double terminal variants and I ordered a couple of packs from a Chinese supplier, who delivered the bits I needed, within a week.  These things are reasonably cheap, so I ordered a pack, just in case I ruined a few, practicing first.

Just a few small screws hold the casing together and after de-soldering the wires going from the battery compartments to the main circuit, I was ready to start.  With battery corrosion as severe as this, all you can do is soak the parts in something like WD40 and attack the rusted parts with a small screwdriver and knife, taking time to avoid damaging the (aged) plastic casing..

After an hour, I’d removed 99% of the mess and fitted the new terminals.  The AA terminals went in OK, but the C type ones needed adapting with some metal I had lying about in the workshop.  A quick re-attachment of the wiring,  a quick clean with brake cleaner to de-grease and then touch up with some satin black paint and one would never know that batteries had ever wreaked such havoc.

Sometimes, I want to hang on to some of the things I repair.  This was one such item, but alas, I had to give it back.

Time for a brew.

Re-vamped Micro Mini Scooter (just for fun).

A Micro Mini Scooter repair, just for fun!

I really had no idea that Micro Scooters have been a ‘thing’ for the last few years and as a result, there are lots to choose from on the second-hand market.  We picked up a ‘bargain’ for our oldest daughter for a princely sum of £5.00 via a local Facebook For Sale page.  With hindsight, it was overpriced.

Just about every part of the scooter was either nasty or plain broken.  The handle bar grips were missing, the wheel bearings were all shot to pieces, the steering mechanism seized and the rear brake was missing.  The back brake on this scooter type, I’ve since found out, have a habit of snapping off with hard use, so that should have been the clue to the low, low price.  But if you read these pages, you know me, I like a challenge.

First step was to address the static wheels.  An Allen key holds the wheels on to the stub-axels at the front of the scooter and there’s something similar on the trailing wheel.  The bearings on our wheels were beyond a re-grease as they’d appeared to have spent their entire life at the bottom of The Channel.

This slideshow requires JavaScript.

Luckily, the bearings are easy to replace and good-quality generic items are available on eBay for under £5.00 for a whole set (6 bearings, 2 per wheel).

Next came the handlebar grips.  Ours were missing and again, generic ‘copy’ grips are available on eBay which are perfect for the job and are half the price of the original equipment.  While I was shopping on eBay, I also found an original Micro Scooter bell.  Just the job.

IMG_5715
FixItWorkshop, May’18, Micro Mini Scooter, new handlebar grips and bell fitted, prior to painting.

The steering mechanism was next and all it needed was a good clean up and light lubrication with some plastic-friendly white PTFE grease, readily available from Toolstation.

This slideshow requires JavaScript.

The shabby foot plate area was once baby-blue but had since faded and had evidence of scrapes.  It looked a bit sorry for itself.  I decided to address this by giving surfaces a good clean up and then key with wire wool.  A couple of coats of good quality plastic primer and then a couple of coats of vinyl black paint, which now gave the scooter quite a ‘presence’.  I then decided to improve the foot plate ‘grippy-ness’ by applying a custom grip tape design.

This slideshow requires JavaScript.

Before re-attaching the foot plate back to the chassis, the brake needed to be replaced.  As with some of the other fixings on the scooter, the brake’s fixings were so rusty, they needed to be drilled out and replaced.  Luckily the new original equipment brake came with new improved fixings which fitted perfectly.

This slideshow requires JavaScript.

Thanks to the cool dudes at Alleyoops, Worthing for their help and advice www.alleyoopsskates.co.uk.  The UK Micro website is also very good as it lists spare parts www.micro-scooters.co.uk/spares-support.

Micro Mini Scooter (AKA ‘Triggers Broom’) renovation spend, May’18:

New good quality bearings                                                        eBay                      £4.15

Generic copy Micro Scooter handlebar grips                         eBay                      £9.75

Genuine Micro Scooter bell                                                        eBay                      £7.78

Paint and sundries                                                                        Shed                      £2.00 (approx.)

Grip Tape (customised to fit)                                                       Alleyoops            £8.00

Genuine Micro rear brake                                                            Alleyoops            £8.99

 

Total                      £40.67

I know what you’re thinking… for £40 more, I could have bought a brand-new scooter and saved myself the bother.  At times, I did question my own sanity.  But what we now have is a perfectly serviceable, one-off that no one else will have.  Can you put a price on that?!