Flimsy Bosch Athlet 25.2V cordless vacuum cleaner

I quite like the idea of this vacuum cleaner in that it’s lightweight, easy to use, highly portable and easy to maintain. All things that make a great product.

The particular vacuum cleaner came in to the workshop, just outside of its warranty period and had been looked after well.  However, it had developed a nasty intermittent cutting-out problem when in use.  I also noticed that the charger’s flex had also cracked near the wall plug, making it dangerous while charging.

First things first and it was off with the rollers and filters to clean any obstructions that might make a device like this overheat.  Nothing obvious there, but all items cleaned and washed as a precaution to allow the roller to move freely and the vacuum to breathe easily.

Closer inspection of the handle area revealed a weakness in the design which had meant that the quick-release mechanism had caused an electrical connection to degrade, causing the cutting out.

The only remedy was to address the handle’s weak point with a mechanical fix and make good the electrical contact.

I hope Bosch take note and make an improvement in this area on an otherwise nicely engineered item.

I also did a small repair to the damaged flex on the charger.

Cost of a new vacuum cleaner, circa £250.  Cost of screw… less than 50p (without my time of course!)

Here’s a little video of the repair…

 

 

Author: fixitworkshop.co.uk

Hi, my name's Matt and I'm on a mission to save everyday items from the bin. Many things are repairable, but we've seemingly fallen out of love with mending things. I aim to fix that by publishing each repair I carry out in the hope that others will be inspired to repair their things and keep them for longer.

3 thoughts on “Flimsy Bosch Athlet 25.2V cordless vacuum cleaner”

  1. Thanks for the heads up on a design weak spot in an otherwise accomplished vacuum, it came as a surprise, so many serial connectors !!

    Like

  2. Thanks for the good advice: just cleaning the connectors (quite dirty & carbinised) and tweaking the contacts slightly fixed the same problem for me.

    Like

  3. Thanks. Mine was cutting out now and again. Was not sure if it came from the handle or the bottom connector.
    Cleaned up both. Seems ok now but will end up fitting a screw also as there is a bit of flex.

    Like

Leave a Reply to MNR Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.