A little bit of a Mickey Mouse repair

A novelty pen holder gets a new lease of life

Even as a seasoned repairer you sometimes think hmm, I don’t think I’m going to be able to help this time. I might end up making it worse. This was nearly the case when a lady brought me this Mickey Mouse desktop organiser thingy, in to the workshop for repair.

I’ve never really been a fan of Mickey Mouse. However, after a few minutes of chat with the owner and me staring at Mickey’s face, he started to work his magic somehow. I don’t know if it was the friendly face, disproportionately large ears, or something about that unique colour combination, but at that moment, I decided that I had to help.

This is how it starts for many others, I’m sure.

Make and model: Mickey Mouse desk organiser

Fault reported: snapped-off hand

Cost of replacement: £?

Manufacturer support:  0/10

Cost of parts: £1.00

My repair time: 1 hour

Tools needed: Small file, drill

Sundry items: Paint, car body filler, glue, bit of a rivet

Cleaning materials: Polish

Repair difficulty: 4/10

Cups of tea: 1

Biscuits: 1 Bourbon

This beloved Mickey Mouse pen holder belongs to a local Worthing teacher and had previously adorned her desk for many years until Mickey had an accident, leaving his left arm broken. Ouch.

Despite home attempts involving sticky tape and super glue, his arm simply wouldn’t heal, so the owner did the responsible thing, taking him to hospital. The hospital in this case was my shed.

Resin-formed sculptures like this are tricky to mend as unless you know the resin’s formula, you don’t really know how a general glue will react. And react they can. Get the glue type wrong and you can turn your once loved plastic gem in to a smoking mess. Believe me, I’ve done it.

Fortunately, the super glue used previously hadn’t done much harm, but it had eroded some arm away.

So, I had a hand and an arm stump. Not much to go on. Whilst mulling Mickey’s issue over a brew, it became clear that the only way to go was to use a little bit of ‘real-world’ tech. Cutting down a spare aluminium rivet to use as a ‘bone’ pin, I was able to drill in to both hand stump and arm and use the pin to hold both parts together. I set the pin in place using some fairly inert Gorilla Glue (good stuff). However, this isn’t the end of the repair.

There was a gap around the join as material was missing. I decided to form a new wrist at Mickey’s stump using some car body filler, left over from my years of Mini ownership. A little dab of filler around the joint, followed by a few hours wait, followed by a small rub down and the arm was ready for paint. The mouse’s body is finished in a satin black so I decided to recoat the arm using some Fortress black anti-reflective brush-on paint, that I had in the shed, as you do.

After 24 hours of close observation, waiting for the paint to dry, Mickey was ready to leave hospital.