I carry out a few Kenwood Chef repairs a year and usually, they can be brought back to full health with simple tools and repair components. I’ve not had a faulty Chef brought in to the workshop which hasn’t left ready for service. Yet.
One common theme with all older machines is that the motor speed control circuitry can fail which either manifests itself with symptoms including, but not restricted to; electrical burning smells and smoke, the motor not running smoothly or not running at all. While the failure of a Kenwood Chef may look spectacular when it happens, the repair is fairly straightforward, if you have some basic skills, tools and some patience.
This particular A901 came in with four faults; poor feet condition, cracked cowling, the speed control knob was loose and once I opened up the motor unit to look further, burned-out capacitors.
To some, this list of faults might seem a bit daunting, but it’s standard fare on a Chef of this age and to be expected after thirty plus years service. Due to the excellent design of the product, the faults are all repairable with commonly available parts.
After about an hours’ work, the feet were replaced, the motor circuitry repaired and the replacement cowling refitted. The speed control knob had come away from the motor body and only required the pin that held it in place ‘pressing’ back in to the housing, resulting in one happy mixer.
One of my aims on this website is to share my experience and best practice so for the first time, I made a video of the complete motor repair in real-time. So, if you have a Chef to repair and twenty minutes, grab yourself some popcorn, a notepad and pen and enjoy.
Cost of replacement: £150.00 and up. Cost of repair: £30 plus my time and tea.
The quality of your videos is getting better with every upload!
Get Outlook for Android
________________________________
LikeLike
Thank you! All feedback very welcome.
LikeLike
Hi, there a ‘right way round’ for the resistor? Thanks
LikeLike
The resistors are non polarity conscious, so no
LikeLike
Hi, what glue do you use for the crack in the top white cover? And what glue can you use for a crack in the mixing bowl?
LikeLike
Hi Charlotte, I’d buy a new or good secondhand bowl as they’re reasonably priced. You could use an epoxy resin glue for the cover.
LikeLike
Were can I get a Kenwood chief food mixer rewired
LikeLike
Hello Dave. If you’re in the UK, I can do it. fixitworkshop@btinternet.com
LikeLike